SS10/II - Parts - Miscellaneous Options - Freedom Series 3000
Freedom Series 3000
Models 3150 / 3200 / 3250 / 3300
SUN PART #
VENDOR PART #
DESCRIPTION
370-1826
217192-101
Phase Lock Loop Clock
370-1828
217183-101
Performance Module
370-1829
217191-102
Motherboard
370-1830
414114-001
4MB Texture Memory
370-1831
414114-256
1MB Texture Memory
370-1832
217771-100
Actuator
370-1833
415109-004
Power Supply
370-1834
217354-100
Fan, 80 mm
370-1835
217355-100
Fan, 120 mm
370-1836
418224-002
Power Switch
370-1837
418604-021
AC Line Filter
370-1838
418704-001
Circuit Breaker
370-1839
418751-122
Thermostat
370-1840
401160-010
CPU Interface Cable
370-1841
517602-001
Video Adapter Cable
370-1842
517603-016
Video Cable
370-1849
217181-100
SBus Platinum Card
None
217180-100
SBus Turbo Card
None
414114-004
16MB Texture Memory
None
801035-851
Hi-Speed Fan, 120 mm
None
523640-004
Rear Air Filter
None
523640-011
Front Air Filter
None
523640-009
Top Air Filter
None
523640-010
Side Air Filter
855-2342
517906-965
Series 3000 Support Manual
Notes
Use the Actuator to remove or install Performance Modules. Failure to use
the Actuator can result in damage to the Connectors, Motherboard, or
Performance Modules.
Wait a minimum of two minutes between card installation and removal. A duty
cycle of 34 seconds maximum Actuator on-time and four minutes minimum Actuator
off-time is recommended for optimum connector life.
Two Hi-Speed 120 mm Fans cool the Performance Modules. One 120 mm Fan cools
the Power Supply. The fans are not interchangeable.
The SBus Turbo card is not compatible with the 25MHz SS20 SBus.
The PLL is part of the Motherboard. Troubleshooting and removal of the PLL
is not included in the Support Manuals.
Print-friendly Page
